جهاز الشحنات الجديد

[PS 2] MAN,SCANIA,VOLVO,ISUZU, MB, Fuso, MACK and IVECO ....etc Truck Diagnostic tool with Touching LCD & Bluetooth

[XTOOL] PS2 Super Truck Tool,Test MAN,Fuso,VOLVO,MB, SCANIA, Mack and IVECO ...Etc

1.New arrival super truck tool
2.Test MAN,SCANIA,VOLVO,MERCEDES, Fuso,Mack and IVECO etc....
3.Touching LCD,Bluetooth
4.Free update
5.Best quality

PS2 HAEVY DUTY can diagnose VOLVO, SCANIA, MAN, IVECO,MERCEDES BENZ,ISUZU,MACK, COMMINS,HINO , IVECO etc.

Power switch--- ses for starting and closing of main engine
USB connection ----ses this connection to carry on the data synchronization with PC.
VGA connection ---ses this connection to link the external monitor

Main test connection ---ses the testing line to carry on the vehicles diagnosis.
power connection -- use for the exterior power supply
touching pen ---es in clicking on the touching-screen.

serial port: Uses in the main body debugging
SD card slot: uses for SD card
paper outlet: use for mini printer

E. Function of VCI diagnostic box:

The VCI box communicates with PS2 mainframe and vehicle. It is also called lower-position machine box. This diagnostic box has two connections: DB15 and OBD II. The main testing line connects PS2 mainframe with DB15. The OBDII connection could link with the testing adapter (vehicle with OBDII adaptor could directly link with PS2 mainframe)
PS2 mainframe with no main testing line also can do diagnosis as the bluetooth communication module has been installed into the VCI diagnosis box. Please change the setting from “on-line diagnosis” to the “wireless diagnosis” on the menu if you are wondering to use it with wireless!

F. Using the multi-jumper box

Tip: If you use the OBD testing connectors for direct connection, can only detect the standard diagnostic connector pin out on the connected system (pin 7 for ISO diagnosis, pins 2 and 10 for SAE diagnosis, 6 and 14 pins for the CAN diagnosis). This is usually the engine control system, some cases may find other systems. All diagnostic criteria did not take out the plug pins on the OBD system must use the test connection with the 'million a jumper box' to the jumper connection test. In the use of 'million a jumper box' to the jumper connection test, click on that connection as follows:

⑴ the multi-jumper box with cables

① Ground
② power lines
③ signal lines

⑵ note of the side hole on multi-jumper box , it is visible on the label place of the box back

2. PS2 technical parameters:

① operating system: WINCE 5.0 operating platforms
② CPU: SAMSUNG 32 bits processors, basic frequency is 400MHZ random memory: SDRAM 64M
③programming memory: FLASH 64M ,supports SD card slot-in and slot-out
④mainframe battery: rechargeable battery 3500m/Ah
⑤mainframe power supply: DC12V/24V
⑥mainframe power: 25W
⑦printer: Mini high-speed thermal sensitive printer
⑧screen: 8 inches real-color touch-screens, 800×600 with LED back-light
⑨relative humidity: <90%, temperature: -20-50℃
⑩wireless communication: blue-teeth

3. Package parameters:

①machine composition: mainframe with SD card, touching pen, testing adapters, group of lines, SD card adaptor, operation manual and outside suitcase
②overall size: 305.2×215.2×85mm
③weight: 8KG

operating system: WINCE 5.0 operating platforms
CPU: SAMSUNG 32 bits processors, basic frequency is 400MHZ random memory,RAM 64M
programming memory: FLASH 64M
exterior memory: supports SD card slot-in and slot-out
mainframe power supply: DC12V/24V
mainframe power: 25W
printer: Mini high-speed thermal sensitive printer
screen: 8 inches real-color touch-screens, 800 with LED back-light
machine composition: mainframe, testing adapter, group of lines, manual and outside box
temperature: -20-50
relative humidity: <90%
mainframe battery: rechargeable battery 3500m/Ah
wireless communication: blue-teet
weight: 10KG