|
Description:
VAG Can Commander Hardware is developed to work with
the new models of Volkswagen, AUDI, SEAT and SKODA
cars equipped with CAN System from 2005 year to
nowadays and also old ones with ISO9141. With this
hardware you can service all these models. The
interface works with the fast CAN protocol and
ISO9141 protocol.
(Protocol ISO9141, so called K Line system, is
supported with reading/writing eeprom ECU = EDC15
and ME7xx units only.
NOTE: For tachometers with protocol
ISO9141, so called K Line system,
Vag Tacho USB
diagnostic interface is recommended).
VAG CAN Commander
interface
has been designed for both: full car system
diagnosis and odometers servicing and even chip
tuning. So you will be able to test all xxxx-units
in system, read PIN codes and correct millage
if an odometer has been replaced for example. The
feature of IMMO OFF/ON is also supported. You
will be even able to read and modify ECU EEprom &
flash memory for tuning your engine. All these
are bundled in one hardware. It combines many
useful functions best suitable for both, in home
quick car fault finding and modern workshops. It has
been designed for minimal PC system requirements.
Works on almost all Pentium class OS with required
one USB port. (Windows 98, NT, 2000 and XP). It’s
been professionally made with smd technology All
electronics parts are lead free (RHOS) and closed
inside OBD2 plug which is also made of very good
materials. There's a 12months warranty for this
product.
You will
be able to find a fault in each electronic system of
your car. Find that you can spare much cash even if
your car needs qualified service repair. It’s
important to know what’s going on just before you
visit car service station.
MAIN FEATURES:
- Designed for new VAG
group cars with CAN-TP2.0
protocol: VW, Audi, Seat, Skoda
- Complete car diagnostics: read/erase fault codes
with full description. (AIRBAG, ABS, IMMOBILIZER, ENGINE
with range 0x01 till 0x80 addresses ,etc)
- Read/Edit/Write FLASH/EEPROM memory, Many K Line
cars also supported (list of tested cars is below)
- change mileage and read PIN code (list of tested
cars is below)
- New Key programming,
- Works on OS: Windows 98, NT, 2000 & XP
- Software version 4.5 & 5.5 FULL
- USB communication
- 12 months warranty and technical support online
Here is a list of cars tested with
interface
(full diagnosis)
-
Audi A3
-
Audi A6
-
Audi A8
-
Audi Q7
-
Audi Allroad
-
Porsche Cayenne
(2005+),
-
Seat Leon (2005+)
-
Seat Toledo
(2005+)
-
Seat Altea
-
Seat Altea XL
-
Seat Toledo (CAN)
-
Seat Leon (CAN)
-
Skoda Octavia II
-
Skoda Scout
-
Skoda Roomster
-
VW Jetta (MY2006)
-
VW Caddy
-
VW Golf5 VDO oraz
VISETEON
-
VW Crossgolf
-
VW Phaeton
-
VW Touaran
-
VW Touareg
-
VW EOS
-
VW Individual
-
VW Passat platform
B6 (MY2006)
-
and others...
Here is a list of cars
tested with millage correction (odometers):
Here is a list of cars
tested with reading PIN options:
Do not visit workshops before test procedure,
DO IT
YOURSELF! :-)
You
will do it fast, with no problems, professionally and
with even low cost!
Product of Poland! find
that it’s solid and professional made.
That’s what you get?
1)
Diagnostic Interface VAG CAN Commander supplied with
USB socket (all electronic parts inside OBD2
socket),
2) CD with User Manual In PDF format and software,
3) 12 months
Warranty
(sticker)
Warranty and
technical support online
|
